weihao_law
automations
E2E-S05S12-WC-C1
| Detection head size | M5 |
|---|---|
| type | Cylindrical type (with screw), Shield type |
| Detection distance | 1.2 mm ± 10% |
| Set distance | 0 to 0.84 mm |
| Hysteretic | 15% or less of the detection distance |
| Detectable object | Magnetic metal (Detection distance of non-magnetic metal decreases) |
| Standard detection object | Iron 4 × 4 × 1 mm |
| Response frequency | 4 kHz |
| Type of power supply | DC 3 wire type |
| Power-supply voltage | DC 10 to 30 V (including ripple (pp) 10%) |
| Operating voltage range | 10 to 30 VDC |
| Current consumption | 10 mA or less |
| Control output (output format) | NPN open collector |
| Control output (switching capacity) | 100 mA or less |
| Control output (residual voltage) | 2 V or less (when load current is 100 mA, cord length is 2 m) |
| Indicator light | Operation indicator light (yellow) |
| action mode | No |
| Protection circuit | Load Short Circuit Protection Output Reverse Connection Protection Power Reverse Connection Protection Surge Absorption |
| Ambient temperature range | At use: -25 to 70 ° C Storage: -25 to 70 ° C |
| Ambient humidity range | When used: 35 to 95% RH Storage: 35 to 95% RH |
| Influence of temperature | Within the temperature range of -25 to + 70 ° C, within ± 15% of the detection distance at 23 ° C |
| Effect of voltage | Within the range of the rated supply voltage ± 15%, within ± 2.5% of the detection distance at rated supply voltage |
| Insulation resistance | Between charging unit and casing: 50 MΩ or more (DC 500 V mega) |
| Withstand voltage | Between charging unit and casing: AC 500 V 50/60 Hz 1 min |
| Anti-vibration | Durability: 10 to 55 Hz Multiple amplitude 1.5 mm X, Y, Z direction 2 h |
| Impact resistance | Durability: 500 m / s ** 2 X, Y, Z directions 10 times in each direction |
| Protective structure | IEC: IP 67 Internal standard: oil resistant |
| Connection method | Code pullout type (Cord length: 2 m) |
| mass | Packing status: Approximately 35 g |
| Material | Case: SUS303 (EN 1.4305) Detection surface: Heat resistant ABS cord: PVC (PVC) tightening nut : SUS 430 (EN 1.4016) Toothed washer: SUS 303 (EN 1.4305) |
| accessories | Instruction manual, format label, nut set |
Reviews
There are no reviews yet.