TL-W5MD1 Omron photoelectric switch
| Detection head size | 18 mm x 10 mm x 30.5 mm |
|---|---|
| type | Square, non-shielded type |
| Detection distance | 5 mm ± 10% |
| Setting distance | 0 to 4 mm |
| Hysteresis | Less than 10% of detection distance |
| Detectable object | Magnetic metal (nonmagnetic metal reduces detection distance) |
| Standard detection object | Iron 18 x 18 x 1 mm |
| Response frequency | 500 Hz (average value) |
| Power supply type | DC 2-wire system |
| Power-supply voltage | DC12 to 24V (Ripple (pp) 10% or less) |
| Operating voltage range | DC 10 to 30 V |
| Leak current | 0.8 mA or less |
| Control output (switching capacity) | 3 to 100 mA |
| Control output (residual voltage) | 3.3 V or less (load current 100 mA, cord length 2 m) |
| Indicator light | Operation indicator (red), setting indicator (green) |
| action mode | NO |
| Protection circuit | Load short circuit protection surge absorption |
| Ambient temperature range | When using: -25 to 70 ° C Storage: -25 to 70 ° C |
| Ambient humidity range | When using: 35 to 95% RH storage: 35 to 95% RH |
| Temperature effect | Within ± 25 ° C to + 70 ° C, ± 10% or less of detection distance at 23 ° C |
| Effect of voltage | Within ± 15% of rated power supply voltage, ± 2.5% or less of detection distance at rated power supply voltage |
| Insulation resistance | Between the charging part and the case: 50 MΩ or more (at DC 500 V mega) |
| Withstand voltage | Between the charging part and the case: AC 1000 V 50/60 Hz 1 min |
| Vibration resistance | Durability: 10 to 55 Hz, double amplitude 1.5 mm X, Y, Z directions 2h |
| Shock resistance | Durability: 500 m / s ** 2 times in each direction of X, Y and Z |
| Protective structure | IEC: IP67 internal standard: oil resistant |
| Connection method | Cord drawer type (cord length: 2 m) |
| mass | Packing condition: about 80g |
| Material | Case: Heat-resistant ABS Detection surface: Heat-resistant ABS |
| accessories | instruction manual |












Reviews
There are no reviews yet.